Contact us
  Unified Hotline
+86-21-59813611
ADD:No.155, Lane255, Sizhuan South Road, Songjiang District, Shanghai.China             
TEL :+86-21-59813611

FAX:+86-21-57808381

Email:sales@stable.net.cn

Venting Valves are normally open
Bleed valve LSVV08/LSVV10

Bleed valves are used on screw compressors or rotary vane compressors: As a component of the zero load bypass system, when the compressor is controlled by an inverse acting proportional controller and the discharge pressure has to be kept constant.To blow off air in course of either start-up or shut-down procedures.

Share:
Details Introduction

Operation

LSVV applied as a component of the zero load bypass system:

The bleed valve LSVV is governed by the pneumatic signal of the invers acting proportional controller. It opens steplessly and blows off excess air if the controller signal decreases to zero load level. Thus the minimum suction pressure and the desired pressure ratio for  zero load conditions is maintained accurately. The approximate loga-rithmic flow characte- ristic of the LSVV ensures smooth transition from load to zero load condi-tions by gradually increasing blow off air quantity. 


Installation

The inlet P is connected to the main line down-stream

from the minimum pressure valve MPVL. The lateral outlet connection R can be either connected to a venting air line leading to the inlet of the suction control valve (closed bypass  system)  or equipped with a suitably sized silencer for full blow off capacity.The signal pressure inlet E on top of the LSVV is connected to the signal pressure line down-stream from the proportional controller LPN.


Technical parameters


Dimensions(mm)

HOME | PRODUCT | ABOUT | NEWS | QUALIFICATION | CONTACT


Stable  Copyright © 2016 www.Stable.net.cn All Rights Reserved 沪ICP备12004668号-1By:TOFEI