Contact us
  Unified Hotline
+86-21-59813611
ADD:No.155, Lane255, Sizhuan South Road, Songjiang District, Shanghai.China             
TEL :+86-21-59813611

FAX:+86-21-57808381

Email:sales@stable.net.cn

Minimum pressure valve
Current Location:Home - Product - Minimum pressure valve
Minimum pressure valve LMPV50BH

For oil-injected, oil-lubricated screw compressors and other rotary compressors: toregulate the minimum oil pressure required for cooling and lubrication during start-up, off-load and when user ports are filly open.

Share:
Details Introduction

Operation:

Valve opening:

The valve opens when the increasing pressure in the valve exceeds the adjusted opening pressure. Start opening pressure is already marked in the product label.

Valve closing:

The minimum pressure valve begins to close, when the pressure at either valve inlet or valve outlet decreases to less than the opening pressure plus 1 to 1.5 bar.

• If the compressor is loading, the oil separator will be higher than the opening pressure

• If the compressor is idling, the oil separator will be maintained at approx the opening pressure

• It is shut tight, if the pressure at the valve inlet is lower than the pressure at the valve outlet by more than 0.5 to 1 bar.

• The non-return valve will close automatically if there is no air demand or the compressor is stopp 


Technical parameters


Dimensions(mm)

  

HOME | PRODUCT | ABOUT | NEWS | QUALIFICATION | CONTACT


Stable  Copyright © 2016 www.Stable.net.cn All Rights Reserved 沪ICP备12004668号-1By:TOFEI